ZINMAG® DECKING – AN OPTIMAL MATERIAL SOLUTION FOR COMPOSITE CONCRETE FLOOR SYSTEMS

Share on facebook
Share on linkedin
Share on pinterest

During the fabrication and installation of steel decking, contractors and roll-forming workshops are often most concerned about two key issues: surface scratches during lifting and installation, and rapid corrosion at cut edges or punched holes when exposed to fresh concrete. ZINMAG® decking by Ton Nam Kim was developed to comprehensively address these challenges, thanks to its advanced Zn-Al-Mg alloy coating structure.

The first key difference lies in its surface hardness, reaching 140–160 HV—approximately 2.5 times higher than conventional galvanized steel (GI), which typically ranges from 55–65 HV. This superior hardness not only provides excellent resistance to friction, minimizing scratches during transportation and handling, but also enables smoother movement through roll-forming machines. As a result, ZINMAG® surfaces effectively control stress, preventing micro-cracks and coating powder flaking, even during deep profiling and embossing processes.

san deck zalo 1

In addition to its mechanical advantages, ZINMAG® decking offers exceptional long-term protection for steel reinforcement through a self-healing mechanism. Due to the nature of decking applications—where materials are frequently cut and directly exposed to the alkaline and moist environment of fresh concrete—the magnesium component in the coating actively reacts to form a microcrystalline protective layer known as Simonkolleite. This layer acts as a self-sealing shield, covering and sealing cut edges, punched holes, and deep scratches.

By preventing the intrusion of water, oxygen, and other corrosive agents, this protective layer ensures long-term durability, even in harsh environments such as industrial zones or coastal areas, as demonstrated in real-world conditions in Khanh Hoa Province.

As a pioneer in mastering and transparently applying anti-corrosion mechanisms of ZINMAG® technology, Ton Nam Kim delivers an optimal material solution—facilitating easier fabrication for contractors while providing investors with confidence in the long-term durability of composite floor systems.

Nam Kim Steel Joint Stock Company
Lot A1, Đ2 Street, Dong An 2 Industrial Park, Thu Dau Mot City, Binh Duong
T. (+84)274 3748 848 | F. (+84)274 3748 868
Email: info@namkimgroup.vn

Representative office
20th Floor, AP Tower, 518B Dien Bien Phu Street, Ward 21, Binh Thanh District, Ho Chi Minh City
T. (+84)283 6204 829
Email: info@namkimgroup.vn